The 66SP is designed for installation on fuel dispensing hoses that require a substantial volume of flow, and therefore the potential for a high-volume spill.
The 66SP utilizes shear pin technology to ensure separation at proper pull forces, and limit unwanted valve closures that stop or limit fuel flow. Once separated, a qualified service technician can easily repair the breakaway with an OPW 66PRK Shear Pin Replacement Kit.
Pull Force- the 66SP will separate with a maximum pull force of 600 lbs., and limits fuel spillage from either hose end.
Easily Repaired- after separation, the 66SP can be repaired and put back in service with the OPW 66PRK Shear Pin Replacement Kit.
Heavy-Duty Construction- physically designed for durability in high-volume environments, including a protective, red, anodized-aluminum body.
Low Pressure Drop- valve design ensures superior flow rate for high-volume fills.
Special Seals- special fluorosilicone (66SP-5200 only) O-Rings help protect the valve in harsh, high-volume environments.
Design working pressure
50 psi (3.45 bar) maximum pressure
Seals:Viton®, Buna-N and Flurosilicone
Weight: 66SP-5200: 3.80 lbs, 1.72 kg
Width A: 2-1/4" Length B: 7-5/8"
Adding product to your cart
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.